MCP130-450HI/TO

MCP130-450HI/TO Overview

It is mounted through 3 terminals on the power management. There is a Bulk-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes TO-226-3, TO-92-3 (TO-226AA) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During operation, the power ic is supplied with a voltage of 5V. During operation, the power ic is supplied with a voltage of 1. Through Hole mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. 3 pins are present in total in this power management. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Through Hole mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a 60μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to MCP130, the base PMIC number. The maximum supply temperature that PMIC chip can work with is 60μA.

MCP130-450HI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP130-450HI/TO Applications

There are a lot of Microchip Technology MCP130-450HI/TO Voltage Supervisors applications.

• Dash board
• Microcontroller system
• Radar
• FPGA design
• Analog circuit
• Refrigeration
• Military electronics
• DC stabilized power supply module
• Linux and server computing
• DSP