MCP130-460FI/TO

MCP130-460FI/TO Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Bulk model. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. Using Through Hole, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 3 pins on power management. There are 3 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleIt is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supervisor's supply current is specified to 60μA. For similar manage ics search of the manufacturer, you can always refer to MCP130, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 60μA.

MCP130-460FI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP130-460FI/TO Applications

There are a lot of Microchip Technology MCP130-460FI/TO Voltage Supervisors applications.

• Cloud computing
• Dash board
• Automotive permanent magnet synchronous motors
• Set top box
• Detection of phase loss
• DSP
• Smartphones
• Display equipment
• Leakage protection
• Linux and server computing