MCP130T-315I/SN

MCP130T-315I/SN Overview

Power management is mounted through 8 terminals. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 5V. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 8 pins on IC management. 8 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 60μA. To find similar IC managements from the manufacturer, you can always search by MCP130. A maximum supply temperature of 60μA can be used with this power management.

MCP130T-315I/SN Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP130T-315I/SN Applications

There are a lot of Microchip Technology MCP130T-315I/SN Voltage Supervisors applications.

• Medical-specific isolation transformer
• Linux and server computing
• External alarm
• Detection of phase sequence
• Leakage current detection
• Fire equipment power monitoring system
• Solar power charger
• Set top box
• Automotive permanent magnet synchronous motors
• Smartphones