MCP1316MT-29LE/OT

MCP1316MT-29LE/OT Overview

It is mounted through 5 terminals on the power management. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. There is a specification for the peak reflow temperature of the package to be 260. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 5 pins on power management. Power managment ic pin count is 5. Supply voltage (Vsup) should be at least 1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a supply current of 10μA for the power management. It is always advisable to use MCP1316M, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10μA.

MCP1316MT-29LE/OT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current

MCP1316MT-29LE/OT Applications

There are a lot of Microchip Technology MCP1316MT-29LE/OT Voltage Supervisors applications.

• Military communications
• Smart meter
• Power distribution systems of operating room
• Household appliances
• Automotive power systems
• DVR
• Smartphones
• Kitchen appliances
• Microprocessor system
• Leakage protection