MCP131T-195I/LB

MCP131T-195I/LB Overview

It is mounted through 3 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SC-70, SOT-323 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 260. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 3 pins on power management. This power management has 3 pins. Supply voltage (Vsup) should be at least 1V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 90μA. It is always advisable to use MCP131, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 90μA.

MCP131T-195I/LB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current

MCP131T-195I/LB Applications

There are a lot of Microchip Technology MCP131T-195I/LB Voltage Supervisors applications.

• Detection of phase sequence
• Insulation fault location system
• Smartphones
• Analog circuit
• Transformer load monitoring equipment
• Detection of phase imbalance
• Radio
• Set top box
• Smart meter
• Solar power charger