MCP131T-270E/LB

MCP131T-270E/LB Overview

Power management is mounted through 3 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. In this IC management you will find SC-70, SOT-323 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 3 pins on the board. Power managment ic pin count is 3. Supply voltage (Vsup) should be at least 1V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 90μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP131, which is the base power ics number. The maximum supply temperature is 90μA.

MCP131T-270E/LB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current

MCP131T-270E/LB Applications

There are a lot of Microchip Technology MCP131T-270E/LB Voltage Supervisors applications.

• Microprocessor system
• Electronics installed in the vehicle
• Stable power system
• Detection of phase sequence
• Battery-powered equipment
• Insulation fault location system
• FPGA design
• Digitally controlled LDO regulators circuit
• Smartphones
• Battery cars