MCP1650S-E/MS

MCP1650S-E/MS Overview

It comes in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, so switching controller can be used for most applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. A 2.7V~5.5V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~125°C TJ dc switcher before. The switching controller is capable of switching at the 750kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Low Battery, Power Good is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. 8 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 3.3V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "MCP1650". Switching converter has a total of 8 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, DC regulator outputs 100V volts. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. Voltage regulator dc to dc is designed to operate at 88 % duty cycle during power-ups and power-downs to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 850kHz for this dc regulators. The maximum input voltage of the dc switcher is 5.5V, so users need to limit the voltage accordingly. Voltage 2V is needed for the supply. In this case, the dc switcher won't produce more than 100mA watts of output current. Datasheets indicate that the switching converter can output 100V volts at its maximum. There is a 120μA volt supply current. voltage controllers with a minimum voltage output of 3.3V cannot operate.

MCP1650S-E/MS Features

Transistor Driver Outputs
Switching Frequency: 750kHz
Current Limit, Enable, Low Battery, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 88 %

MCP1650S-E/MS Applications

There are a lot of Microchip Technology MCP1650S-E/MS DC to DC converter applications.

• Various precision measuring instruments
• Packaging
• Servo drive system
• Elevator lighting
• Digital video recorders
• Hydrogen power
• Various CNC machine tools
• PSRR circuits
• Special machining machine tools
• Pipe bending machines