MCP1651S-E/MS

MCP1651S-E/MS Overview

Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tube surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). A 2.7V~5.5V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~125°C TJ. Using this switching controller, it is possible to switch at 750kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Low Battery, Power Good is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 3.3V is input. Searching "MCP1651" will return other relevant dc to dc converter ics. There are 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, DC regulator outputs 100V volts. You should note down the dc dc regulator's usual output current of 100mA when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 88 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator has a maximum frequency of 850kHz. Because the dc switcher's maximum input voltage is 5.5V users must limit the voltage accordingly. A voltage of 2V must be present in the supply. A dc switcher can only produce an output current of 100mA. Datasheets indicate that the switching converter can output 12V volts at its maximum. A current of 120μA is supplied to it. 3.3V voltage output is lower than 3.3V. This the controllers dc receives a 120μA nominal current supply.

MCP1651S-E/MS Features

Transistor Driver Outputs
Switching Frequency: 750kHz
Current Limit, Enable, Low Battery, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 88 %

MCP1651S-E/MS Applications

There are a lot of Microchip Technology MCP1651S-E/MS DC to DC converter applications.

• Scientific testing
• CNC system
• Various CNC machine tools
• Nuclear power plants
• Domestic water pumps
• Computer-related products
• Product testing
• Industrial controllers
• Power supplies of electronic gadgets
• Milling machines