MCP2003A-E/P

MCP2003A-E/P Overview

LED drivers benefit from this IC's enhanced 8-DIP (0.300, 7.62mm) package.In the Tube package, this receiver is mounted.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.The wide receiver can be mounted on any Through Hole-type PCB or development board.Power supply requirements for this differential driver are 6V~27V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -40°C~125°C.There is a voltage range of 12V for this line driver ic, so it can operate efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.As the base part number MCP2003 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control is provided by this 8-pin driver IC.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.An input voltage supply of 27V is required to operate the transceiver module.It implements 1 transceivers in total.Using a 90μA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.Input currents exceeding 1mA may cause this can transceiver to malfunction.

MCP2003A-E/P Features

Tube package
8 pins

MCP2003A-E/P Applications

There are a lot of Microchip Technology MCP2003A-E/P Drivers/Receivers/Transceivers applications.

• Wireless security systems
• Satellite ground stations
• Wireless teaching
• Low power, low voltage systems
• SONET/SDH Network
• Structural bonding
• Pocket PC
• LAN, SAN, WAN (local, storage, work area networks)
• Broadcast application
• Fast Ethernet