MCP3002-I/ST

MCP3002-I/ST Overview

The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 8-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MCP3002 family.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.ADC converters can be mounted using Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.1, 2 inputs are employed.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 5V.The ADC converter operates from 3/5V power supplies.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 200 ksps.The ADC converter consists of 1 elements.The output voltage is maintain at 7V.

MCP3002-I/ST Features

1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
1 elements

MCP3002-I/ST Applications

There are a lot of Microchip Technology MCP3002-I/ST ADC applications.

• Cell Phones
• Telecommunications
• RADAR processing, digital oscilloscopes
• Wireless and wired broadband communications
• Instrumentation and test equipment
• Digital Storage Oscilloscope
• High Speed Data Acquisition for PCs
• Communication Systems
• CMOS Image sensors for mobile applications
• Transducer