MIC2131-1YTSE

MIC2131-1YTSE Overview

As a result of 16-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 8V~40V are the dc control's supply voltage and operating voltage, respectively. Worked in an dc switcher with a -40°C~125°C TJ rating. It can switch at 150kHz. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Power Good, Soft Start is included in the dcdc regulator. MIC2131 can be used to locate other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. If you start a project, note down the dc dc regulator's usual output current of 15A. The duty cycle of the voltage regulator dc to dc can be set to 92 % on power-up or power-down to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. The max frequency of the pmic can reach 170kHz. At least -40°C°C is recommended. DC regulator should run at a temperature 125°C higher than 125°C. A 16-eTSSOP would be the supplier dc dc controller package for this part. The phase of this controller is 1. Voltage is rated 40V for maximum supply.

MIC2131-1YTSE Features

Transistor Driver Outputs
Switching Frequency: 150kHz
Current Limit, Enable, Power Good, Soft Start
Max Duty Cycle: 92 %

MIC2131-1YTSE Applications

There are a lot of Microchip Technology MIC2131-1YTSE DC to DC converter applications.

• Medical equipment
• Analog precision reference circuits
• Constant current circuits
• Correction machines
• Digital precision reference circuits
• Large fire protection systems
• Television equipment
• SMT equipment
• Surface processing equipment
• Imported equipment