English

All Products

View All >>
  • MIC2505YM

MIC2505YM

N-Channel PMIC MIC2505 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Microchip Technology
  • Origchip NO: 536-MIC2505YM
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 188
  • Description: N-Channel PMIC MIC2505 8 Pin 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 7 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1998
JESD-609 Code e4
Feature Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 75mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Current Rating 2A
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MIC2505
Number of Outputs 1
Output Type N-Channel
Max Output Current 2A
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Nominal Supply Current 2A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Turn On Delay Time 2 ms
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 7.5V
Nominal Input Voltage 7.5V
Turn-Off Delay Time 20 μs
Ratio - Input:Output 1:1
Voltage - Load 2.7V~7.5V
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO
Rds On (Typ) 30m Ω
Drain to Source Resistance 35mOhm
Height 1.48mm
Length 4.93mm
Width 3.94mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2505YM Overview


It's?packaged?in?the way?of?a?Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.It is part of the MIC2505 family of LED drivers.As a result, there are 8 terminations.For operation, 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 2A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.In this case, it is mounted in the way of Surface Mount.In this LED driving board, there is 75mOhm resistance.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.To choose from, there are 1 channels.This LED driver can handle voltages up to 7.5V volts.It requires 2.7V volts as the minimum input voltage.

MIC2505YM Features


Supplied from 5V
Resistance of 75mOhm
1 channels

MIC2505YM Applications


There are a lot of Microchip Technology MIC2505YM Power Switches ICs applications.

  • Wearable Devices
  • PC Cards
  • Portable Music Players
  • Smart Phones, Feature Phones
  • PC Card Hot Swap
  • Storage (HDDs, SSDs)
  • Mobile Communication Devices
  • Handheld Devices
  • HDD, SSD
  • Smartphone and PDA