MIC2585-2JYTS-TR

MIC2585-2JYTS-TR Overview

This is included in the 24-TSSOP (0.173, 4.40mm Width) package.At the moment, 2 channels are accessible.Hot-swappable device comes in the shape of a Tape & Reel (TR).Surface Mount has set it up this way.The electrical component in question falls into the classification Hot Swap Controller, Sequencer.Ensure reliable operation by setting the temperature to -40°C~85°C.The device has General Purpose applicationsAs you can see in Latched Fault, it's featured.In the case of a 1V~13.2VV power source, it should work just fine.Hot-swappable device belongs to the MIC2585 family of numbers.During operation, 24 pins are used.Fault Timeout, OVP, Slew Rate, UVLO is the number of features it can be programmed with.Presently, there is a sufficient supply of 1.7mA.Surface Mount directs its position.For stable operation, the maximum operating temperature should be 85°C°C.At a minimum working temperature of -40°C degrees Celsius, it maintains its reliability.By default, it produces output 2.There is a maximum supply voltage of 13.2VV that it can handle.As low a supply voltage as possible, such as 1VV, is possible.In this case, 1.7mA is the operative supply current.

MIC2585-2JYTS-TR Features

Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO

MIC2585-2JYTS-TR Applications

There are a lot of Microchip Technology MIC2585-2JYTS-TR hot swap controllers applications.

• Hard drive
• Server backplane system
• Backplane
• Storage network
• Datacom
• PC board hot swap insertion and removal
• Other forms of communications infrastructure
• Network router
• Distributed power systems
• Current monitor output