MIC4811YMM

MIC4811YMM Overview

The board's 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package saves space. In LED drivers, the outputs are all set to 6.For mounting, it uses the Surface Mount method.It is highly reliable and high-performing when it emerges as a Linear.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.The benefits of Signage are considerable.The configuration of the board is built around 10 pins.Undetermined failures may occur if the voltage supply falls below 3V.It is estimated that there are 6 segments.The mount is on its way to Surface Mount.LED drivers are found under the base part number MIC4811.The supply voltage of 5.5V is an acceptable maximum value.As a result, it is designed to be able to deliver a maximum voltage of 5.5V.At its minimal input voltage, it operates at 3V.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.When the maximum supply current is allowed, the value reaches 5.5V.When the maximum supply current is below 50mA, the device can deliver high efficiency.Temperatures should not exceed 125°C in order to ensure stable operation.In order to maintain stable operation, a temperature greater than -40°C is essential.It's possible for this electronic component to fully function when the switching frequency is maintained at 500kHz.

MIC4811YMM Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TJ
Switching frequency of 500kHz

MIC4811YMM Applications

There are a lot of Microchip Technology MIC4811YMM LED Driver ICs applications.

• Replacement lamps
• A- lamps
• Dimmable LED for vehicle interiors
• Architectural lighting
• Power source for accessories such as car audios, car navigation systems, and ETC systems
• Linear fluorescent
• Sports Facility Lighting
• Auxiliary lights for on-vehicle cameras
• Stage Lighting and Signage
• OLED power supply for portable equipment