MIC826TYMT-T5

MIC826TYMT-T5 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. This power ic is packaged in a way that looks like a Cut Tape (CT). In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 6-UFDFN Exposed Pad functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. The pins of the power management system count 6. IC management can only work with a supply voltage of 1.8V volts. The maximum supply voltage (Vsup) is not to exceed 5V volts in this IC management. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~125°C TJ. Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 4.8μA volt supply current. You can always use MIC826, the base supervisor number, to search for similar PMICs of the manufacturer. There are a total of 2 monitored inputs on the power management.

MIC826TYMT-T5 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
4.8μA operating supply current

MIC826TYMT-T5 Applications

There are a lot of Microchip Technology MIC826TYMT-T5 Voltage Supervisors applications.

• Dash board
• Radio
• Urban rail transit weak current power monitoring
• Electrical fire monitoring system
• emergency room
• Microprocessor system
• Important electronics for automotive protection
• Detection of phase sequence
• Battery cars
• Automotive power systems