MKL26Z128VLL4

MKL26Z128VLL4 Overview

MKL26Z128VLL4 MCU is packaged in a 100-LQFP format. With 84 I/Os, it's pretty good. Using the Mounting Type Surface Mount, the MCU is mounted on PCB. As the name implies, this Microcontroller is based on a 32-Bit core. There is a memory type of FLASH in its program memory. There is a temperature range of -40°C~105°C TA for this Microcontroller. An electrical component of this type belongs to the Kinetis KL2 series. This program memory has a size of 128KB 128K x 8, which indicates what the size of the program memory is. A ARM? Cortex?-M0+ Core Processor is at the core of this Microcontroller. The device belongs to MICROCONTROLLER, RISC uPs/uCs/Peripheral ICs Type. During the manufacturing process, 100 terminations were applied to the IC chip. The microcontroller comes in a 32-bit size. There is a 3.3V volt supply output on the chip. In addition to that, the MCU chip has YES DMA channels. The base part number MKL26Z128 MCU can be used to find alternatives. Using YES PWM channels, the device works. This Microcontroller is embedded with a CORTEX-M0 processor family, which is a powerful and efficient CPU. In terms of frequency, it operates at a 48MHz clock rate.

MKL26Z128VLL4 Features

Performance

? 48 MHz ARM? Cortex?-M0+ core

Memories and memory interfaces

? Up to 256 KB program flash memory

? Up to 32 KB SRAM

System peripherals

? Nine low-power modes to provide power optimization

based on application requirements

? COP Software watchdog

? 4-channel DMA controller, supporting up to 63 request

sources

? Low-leakage wakeup unit

? SWD debug interface and Micro Trace Buffer

? Bit Manipulation Engine

Clocks

? 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator

? Multi-purpose clock source

Operating Characteristics

? Voltage range: 1.71 to 3.6 V

? Flash write voltage range: 1.71 to 3.6 V

? Temperature range (ambient): -40 to 105°C

Human-machine interface

? Low-power hardware touch sensor interface (TSI)

? Up to 84 general-purpose input/output (GPIO)

Communication interfaces

? USB full-/low-speed On-the-Go controller with the on-chip transceiver and 5 V to 3.3 V regulator

? Two 16-bit SPI modules

? I2S (SAI) module

? One low-power UART module

? Two UART modules

? Two I2C module

Analog Modules

? 16-bit SAR ADC

? 12-bit DAC

? Analog comparator (CMP) containing a 6-bit DAC

and programmable reference input

Timers

? Six channel Timer/PWM (TPM)

? Two 2-channel Timer/PWM modules

? Periodic interrupt timers

? 16-bit low-power timer (LPTMR)

? Real-time clock

MKL26Z128VLL4 Applications

There are a lot of NXP USA Inc. MKL26Z128VLL4 Microcontroller applications. MKL26Z128VLL4 MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.

• Process control devices

• Coffee machines

• Smart instruments

• Routers

• Mice

• Xbox

• Computers

• Vacuum cleaners

• Teletext terminals

• Smart highways