MM74C373N

MM74C373N Overview

A package called 20-DIP (0.300, 7.62mm) contains it. This package has the format of Tube. There is a Tri-State output configured. This electrical device has Logic type D-Type Transparent Latch. This electronic part is mounted in the way of Through Hole. A 3V~15V supply voltage is required to operate it. A temperature of -55°C~125°C is used for operation. An FPGA in this series belongs to the 74C family. 8 Bits are used in the design of this electronic part. There is no doubt that it belongs to the family 74C373. The pin configuration of the device is 20. Through Hole is the method used for mounting this electronic part. It contains 3 input lines where electronic circuits are present. With an output current of 48mA, it is highly flexible in terms of design. 3 output lines generate the binary equivalent of the input lines. As far as external factors are concerned, it consumes 50nA of quiescent current without getting affected by them. The element count is 1. It achieves superior flexibility by using 8 circuits. 24mA represents the low level output current. There is -48mA high level output current set. Ideally, the operating temperature should be lower than 125°C. A temperature greater than -55°C should be used for operation. It supports a maximum supply voltage of 15V. It operates with the minimal supply voltage of 3V.

MM74C373N Features

20-DIP (0.300, 7.62mm) package
74C series
8 Bits
74C373 family
20 pins
1 elements

MM74C373N Applications

There are a lot of ON Semiconductor MM74C373N Latches applications.

• Clocks
• Hammer
• Network Switches
• Shift left register
• Digital bus buffer
• Four-bit storage with output enable
• Serial Output Register
• Phase comparator
• Display
• General-Purpose Register