MM74HC174M

MM74HC174M Overview

The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. -40°C~85°C TAis the operating temperature. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. A frequency of 31MHzshould not be exceeded by its output. There are 1 elements in it. As a result, it consumes 8μA quiescent current. You can search similar parts based on 74HC174. Input capacitance of this device is 5pF farads. There is an electronic part mounted in the way of Surface Mount. The 16pins are designed into the board. This device's clock edge trigger type is Positive Edge. Despite its superior flexibility, it relies on 7 circuits to achieve it. With an output current of 5.2mA, it is possible to design the device in any way you want. Currently, there are 3 input lines present.

MM74HC174M Features

Tube package
74HC series
16 pins

MM74HC174M Applications

There are a lot of ON Semiconductor MM74HC174M Flip Flops applications.

• Functionally equivalent to the MC10/100EL29
• Guaranteed simultaneous switching noise level
• Parallel data storage
• Common Clocks
• Set-reset capability
• ATE
• Data storage
• Event Detectors
• Latch-up performance
• Synchronous counter