MM74HC374MTCX

MM74HC374MTCX Overview

In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. As part of the package Tape & Reel (TR), it is embedded. There is a Tri-State, Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. Its output frequency should not exceed 35MHz Hz. D latch consists of 1 elements. A total of 20 terminations have been made. The object belongs to the 74HC374 family. An input voltage of 4.5Vpowers the D latch. Its input capacitance is 5pFfarads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. There is an electronic component mounted in the way of Surface Mount. There are 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 8bits are used in this part. It reaches the maximum supply voltage (Vsup) at 6V. Normally, the supply voltage (Vsup) should be kept above 2V. To achieve this superior flexibility, 8 circuits are used. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of 2/6V watts. This D flip flop is equipped with 0 ports. It operates with 3 output lines. As a result, it consumes 8μA of quiescent current without being affected by external factors.

MM74HC374MTCX Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies

MM74HC374MTCX Applications

There are a lot of ON Semiconductor MM74HC374MTCX Flip Flops applications.

• Data transfer
• EMI reduction circuitry
• Memory
• Pattern generators
• Differential Individual
• 2 – Bit synchronous counter
• Memory
• QML qualified product
• Balanced 24 mA output drivers
• Common Clocks