MM74HC574SJ

MM74HC574SJ Overview

The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. A package named Tubeincludes it. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. It should not exceed 35MHzin its output frequency. In total, there are 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. If you search by 74HC574, you will find similar parts. The input capacitance of this JK flip flopis 5pF farads. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 20. It has a clock edge trigger type of Positive Edge. The superior flexibility is achieved through the use of 8 circuits. The 7.8mA output current allows it to be designed with the greatest amount of flexibility. There are 3 output lines on it.

MM74HC574SJ Features

Tube package
74HC series
20 pins

MM74HC574SJ Applications

There are a lot of ON Semiconductor MM74HC574SJ Flip Flops applications.

• CMOS Process
• Clock pulse
• Single Up Count-Control Line
• Parallel data storage
• Computers
• Counters
• Data Synchronizers
• Bounce elimination switch
• Digital electronics systems
• Single Down Count-Control Line