MM74HCT374WM

MM74HCT374WM Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74HCTseries of FPGAs. It should not exceed 30MHzin its output frequency. A total of 1elements are present in it. As a result, it consumes 8μA of quiescent current without being affected by external factors. 20terminations have occurred. The 74HCT374 family contains this object. An input voltage of 5Vpowers the D latch. Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the HCTfamily of devices. It is mounted in the way of Surface Mount. It is designed with 20 pins. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. The design is based on 8bits. The system runs on a power supply of 5V watts. This D flip flop is equipped with 0 ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 7.2mA, it is possible to design the device in any way you want. There are 3 output lines on it. Currently, there are 8 channels available.

MM74HCT374WM Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

MM74HCT374WM Applications

There are a lot of ON Semiconductor MM74HCT374WM Flip Flops applications.

• High Performance Logic for test systems
• Single Down Count-Control Line
• Single Up Count-Control Line
• Parallel data storage
• Supports Live Insertion
• Instrumentation
• Frequency Divider circuits
• Dynamic threshold performance
• Data Synchronizers
• Guaranteed simultaneous switching noise level