MP3301GJ-P

MP3301GJ-P Overview

There is also a SOT-23-5 Thin, TSOT-23-5 package that is used to save space on the board. These LED drivers have 1 outputs.Surface Mount is used to mount the led light driver.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.-40°C~125°C TJ is a valid operating temperature for the led driver.A frequency of 1.3MHz is used as the basis for operation.The LED light driver is configured with a base of 0 pins.If the voltage supply is less than 2.5V, undetermined failures will occur.There is a device mounted on the Surface Mount.There is no problem with the voltage of 6V.The output voltage of the device is 36V.A maximum voltage of 6V is optimized for use by this device.With a minimum input voltage of 2.5V volts, it can operate.When the maximum supply current is allowed, the value reaches 6V.It is possible to provide high efficiency when the maximal supply current is less than 900μA.The operating temperature should not exceed 125°C to ensure stable operation.You can supply 700mA current to the load.Stable operation requires a temperature higher than -40°C.This electronic component can fully perform when the switching frequency is 1.3MHz.Even when operating at a maximal output current of 700mA, it is capable of delivering all the benefits of a LED driver.It is not recommended to exceed 36V in the output voltage.Transmission is available on 1 channels.

MP3301GJ-P Features

Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -40°C~125°C TJ
Frequency of 1.3MHz
Switching frequency of 1.3MHz

MP3301GJ-P Applications

There are a lot of Monolithic Power Systems Inc. MP3301GJ-P LED Driver ICs applications.

• Amusement Machines
• Flicker-free LED Lighting using R1580N
• Museum lighting
• Down lights
• Refrigeration lighting
• Constant Voltage Power Source for portable equipment
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Portable lighting
• A- lamps
• LED Lightings for Industrial Equipment