MPY100SG

MPY100SG Overview

In order to package it, Tube are used.A cost-effective solution has been embedded in the 14-CDIP (0.300, 7.62mm) package.There is a common practice of using 4-Quadrant bits per stage.A voltage of 15V is used for its operation.There is a nominal negative supply voltage of -15V.The frequency range of 0.55MHz is occupied by a modulated radio-frequency signal.In order to prevent signals from reflecting off the end of the transmission line, 14 terminations are installed.Based on its base part number MPY100, an array of electronic parts with a number of similarities can be found.Known for its superior performance and high quality, it is a type of 14-pin electronic component.In the subcategory of Analog Computational Functions, it can be found as an electronic device.To mount it on the PCB, Through Hole is used.Ideally, the electronic device should operate at a temperature of 125°C.A minimum temperature of -55°C should be maintained for the operation of the electronic device.Dual supply voltages should be higher than 8.5V.The dual supply voltage should be lower than 20V.The type of IC ANALOG MULTIPLIER OR DIVIDER is analog.The unit is powered by a dual supply voltage of 15V.An element 1 is incorporated into it.4 circuits are used to achieve the specific functions of the device.An integral part of the MPY series, it is widely used in a variety of industrial and commercial applications.

MPY100SG Features

Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 0.55MHz

MPY100SG Applications

There are a lot of Texas Instruments MPY100SG Analog Multipliers & Dividers applications.

• Fission chambers
• Radar
• Test equipment
• ECG equipment
• Proportional operation circuits
• PDA
• pH (acidity)
• Portable docking station
• Automatic control
• Addition and subtraction operation circuits