MPY634KPG4

MPY634KPG4 Overview

Packing materials Tube are used.For cost-effectiveness, it has been included in the 14-DIP (0.300, 7.62mm) package.It is common to use 4-Quadrant bits per stage.The voltage supply for this device is 15V.This device is supplied with a nominally negative voltage of -15V.Radio-frequency signals modulated at 10MHz occupy the frequency range of 10MHz.With its base part number MPY634, electronic parts with a number of similarities can be found.It is a type of 14-pin electronic component famous for its high quality and superior performance in the industry.Electronics that fall under the subcategory Analog Computational Functions are included in this device.To mount it on the PCB, Through Hole is used.In order to ensure the integrity of the electronic device, the maximum temperature should be kept at 85°C.Electronic devices should be operated at a minimum temperature of -40°C.Ideally, it should be used with an operating supply voltage of 4mA.There should be a higher dual supply voltage than 8V.Dual supply voltages should be lower than 18V.The unit is powered by a dual supply voltage of 15V.The device is capable of operating from a supply voltage of 15V.In this case, the maximum supply voltage is limited to 18V.Normal operation requires a voltage of 8V as the minimum supply voltage.The 4 amplifiers provide high efficiency by working together.It is a well-known part of the MPY series and is used in many different applications.A 1 channel configuration has been selected.

MPY634KPG4 Features

Supplied in the 14-DIP (0.300, 7.62mm) package
Bandwidth of 10MHz
Operating supply current of 4mA
Operating supply voltage of 15V
4 amplifiers

MPY634KPG4 Applications

There are a lot of Texas Instruments MPY634KPG4 Analog Multipliers & Dividers applications.

• Medical imaging
• Band-stop filter
• Radiation thermometry transducers
• Comparator
• High input resistance broadband
• Proportional counter tubes
• Automotive sensors
• High/low-pass filter circuit
• Radar
• Test and measurement instruments