NB2305AI1HDR2G

NB2305AI1HDR2G Overview

The Tape & Reel (TR) method is used for packaging clock ICs. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. 8 terminations can be found in frequency generators. This clock generator ic should receive a voltage of 3.3V. This Clock PLL will be fed by CMOS as its input. For a full understanding of the electronic part's performance, 1 circuits are implemented. There is a maximum frequency of 133MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. The maximal supply voltage this clock generator would take is 3.6V. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. This electronic component can be classified as a Zero Delay Buffer. In particular, this clock PLL is designed to be used with microprocessors. It is possible to find its related electronic parts by searching for the base part number NB2305A. There are 8 pins on the frequency generator that are available for use. There is a maximum supply voltage of 3.3V that clock generator can handle. In general, this clock PLL is considered a Clock Drivers device. The output frequency is magnified as high as possible with 5 signal outputs.

NB2305AI1HDR2G Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

NB2305AI1HDR2G Applications

There are a lot of ON Semiconductor NB2305AI1HDR2G Clock Generators applications.

• Electronic equipment
• MRI
• Threshold extension
• 1 Gigabit Ethernet
• Reference signals to RF systems
• Various decoding circuits
• Media broadcast servers
• Clock recovery
• Bluetooth receivers
• Local oscillator source in receiver