NC7SP158L6X

NC7SP158L6X Overview

In order to save board space, digital switch is located in the 6-UFDFN.It is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The analog IC in the multiplexers is identified as Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at 0.9V~3.6V, designers are provided with a greater degree of flexibility.Several applications are possible for 7SP series multiplexers.It is designed with 6 terminations as part of its basic configuration.The multiplexer's system is powered by 1.2V voltage.A component pin count of 6 can be found on this turn signal switch.As a result, conductors end at NO LEAD.Among the family of P the logic switch is a member.The minimal supply voltage (Vsup) should be kept at 0.9V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.There are 1 outputs designed for the operation of the turn signal switch.In this multiplexer, there is a total of 2 inputs.

NC7SP158L6X Features

Supplied in the 6-UFDFN package

NC7SP158L6X Applications

There are a lot of Rochester Electronics, LLC NC7SP158L6X Signal Switches / Multiplexers / Decoders applications.

• LVDS
• Speed synchronization of multiple motors in industries
• Enabling different rows of memory depending on address in memory chips
• Telephone network
• To select different devices in microprocessor input
• Microprocessor input/output systems
• Analog to digital conversion
• Implementing boolean functions with multiple variables
• Make full adder
• Enabling block of memory depending on address in memory chips