All Products

NCP1014AP100G

7 Terminations8.5V~10V 7 Pin NCP1014 AC to DC power converter


  • Manufacturer: ON Semiconductor
  • Origchip NO: 598-NCP1014AP100G
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 310
  • Description: 7 Terminations8.5V~10V 7 Pin NCP1014 AC to DC power converter(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 5 Weeks
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Surface Mount NO
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2005
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Tin (Sn)
Subcategory Switching Regulator or Controllers
Power Rating 12W
Max Power Dissipation 19W
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 2.54mm
Frequency 100kHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number NCP1014
Pin Count 7
Output Voltage 700V
Max Output Current 450mA
Input Voltage-Nom 8V
Number of Channels 1
Analog IC - Other Type SWITCHING REGULATOR
Power Dissipation 19W
Output Current 450mA
Voltage - Supply (Vcc/Vdd) 8.5V~10V
Topology Flyback
Min Input Voltage 100V
Control Mode CURRENT-MODE
Max Input Voltage 250V
Halogen Free Halogen Free
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Over Load, Over Temperature, Over Voltage
Max Duty Cycle 72 %
Duty Cycle 67%
Output Isolation Isolated
Min Input Voltage (AC) 100V
Max Input Voltage (AC) 250V
Height 3.44mm
Length 10.16mm
Width 6.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCP1014AP100G Overview


A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.The voltage range of the supply can be set to 8.5V~10V (Vcc/Vdd).In total, it has 7 terminations.On this ac/dc converter, there are 7 pins.There are 7 pins on the ac-dc converter.The NCP1014 family allows you to search for similar acdc converters.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 450mA .As a result, its output voltage is 700V .A high efficiency can be achieved by operating at a frequency of 100kHz .Here is the standard for REACH SVHC : No SVHC .There is an option to power the AC to DC converter input voltage under 250V .The AC to DC inverter may be operated with an input voltage less than 100V volts.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 250V .We currently have 1 channels available.

NCP1014AP100G Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 450mA
With 1 channels on it

NCP1014AP100G Applications


There are a lot of ON Semiconductor NCP1014AP100G AC DC Converters applications.

  • Wireless System
  • Z-Wave
  • Low-Voltage I/O System Power
  • Standby and Auxiliary Power Supplies
  • 3.3V power supplies
  • Appliance Power Supplies
  • Adapter/Charger for Cell
  • Standby power supplies for VCR
  • Portable Apparatus
  • Standby Power Supplies