All Products

NCP1072P065G

7 Terminations6.3V~10V 7 Pin NCP1072 AC to DC power converter1 Outputs65kHz


  • Manufacturer: ON Semiconductor
  • Origchip NO: 598-NCP1072P065G
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 656
  • Description: 7 Terminations6.3V~10V 7 Pin NCP1072 AC to DC power converter1 Outputs65kHz (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 2 Weeks
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 7
Weight 850.995985mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Tin (Sn)
Subcategory Switching Regulator or Controllers
Power Rating 19W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Base Part Number NCP1072
Pin Count 7
Number of Outputs 1
Output Type Adjustable
Max Output Current 250mA
Input Voltage-Nom 8V
Analog IC - Other Type SWITCHING CONTROLLER
Output Current 250mA
Voltage - Supply (Vcc/Vdd) 6.3V~10V
Output Power 19W
Topology Flyback
Min Input Voltage -300mV
Control Mode CURRENT-MODE
Frequency - Switching 65kHz
Max Input Voltage 10V
Halogen Free Halogen Free
Nominal Input Voltage 230V
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 72 %
Duty Cycle 68%
Output Isolation Isolated
Voltage - Breakdown 700V
Voltage - Start Up 8.2V
Min Input Voltage (AC) 100V
Max Input Voltage (AC) 250V
Height 3.44mm
Length 10.16mm
Width 6.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCP1072P065G Overview


This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .Tube case is available for the ac dc converter.The AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.When the switching frequency reaches 65kHz , the process is complete.The AC/DC converter is capable of being used when the supply voltage is 6.3V~10V (Vcc/Vdd).A total of 7 terminations have been recorded.On the ac/dc converter, there are 7 pins.There are 7 pins in total.Through Hole is the recommended mounting method for the ac dc converters.If you select the NCP1072 family, you will be able to search similar acdc converters.The number of outputs to run is 1 .The following ac to dc conversions are contained in Switching Regulator or Controllers .We are setting the output current to 250mA .Here is the standard for REACH SVHC : No SVHC .Input voltages under 10V can be used to power the AC to DC converter.There is 19W output power generated by a coverter.A voltage of less than -300mV V can be used with the AC to DC inverter.Input voltage (AC) should be below 250V .There is a Adjustable output configured.

NCP1072P065G Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 250mA
Output Type : Adjustable

NCP1072P065G Applications


There are a lot of ON Semiconductor NCP1072P065G AC DC Converters applications.

  • Rice Cooker
  • Chargers for cell/cordless phones
  • Vacuum Cleaner
  • Home appliances
  • IoT Applications
  • Consumer electronics
  • Adapter/Charger for Cordless Phones
  • Standby power supplies for IR
  • Industrial controls
  • Lighting controls