NCP303LSN22T1

NCP303LSN22T1 Overview

A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a SOT-23-5 Thin, TSOT-23-5 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. The supervisor is always powered by a 1.5V volt supply. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 5 pins on IC management. This power management has 5 pins. It is recommended that Vsup should not be less than 800mV for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 500nA. It is always advisable to use NCP303, the base supervisor number, when searching for similar PMICs from the manufacturer.

NCP303LSN22T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP303LSN22T1 Applications

There are a lot of ON Semiconductor NCP303LSN22T1 Voltage Supervisors applications.

• DC stabilized power supply module
• Computer applications
• Network equipment
• Analog circuit
• Power distribution systems of infant care room
• Linux and server computing
• Power distribution systems of CCU
• Medical-specific isolation transformer
• Satellite navigation
• Sensitive sensors