NCP305LSQ34T1G

NCP305LSQ34T1G Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a SC-82A, SOT-343 package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 4 pins. 4 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 1.2μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using NCP305, the base power ics number.

NCP305LSQ34T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1.2μA operating supply current

NCP305LSQ34T1G Applications

There are a lot of ON Semiconductor NCP305LSQ34T1G Voltage Supervisors applications.

• FPGA design
• Power communication system
• Cloud computing
• Microprocessor system
• Insulation fault location system
• Power distribution systems of operating room
• Low voltage/high power - AI, GPU
• Important electronics for automotive safety
• Detection of phase sequence
• Microcontroller system