NCV33161DMR2G

NCV33161DMR2G Overview

Power management is mounted through 8 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. Please refer to power management for 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. The supervisor is always powered by a 5V volt supply. When 2 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The total number of pins on this power management is 8. Pin count of the power management is 8. It is recommended that Vsup should not be less than 2V for this IC power. Voltage (Vsup) shouldn't exceed 40V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a supply current of 560μA for the power management. A similar IC managements number of the manufacturer can always be found by using NCV33161, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 900μA. It is one of the well-known Automotive, AEC-Q100 series power ic line.

NCV33161DMR2G Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2V
560μA operating supply current

NCV33161DMR2G Applications

There are a lot of ON Semiconductor NCV33161DMR2G Voltage Supervisors applications.

• WiFi router
• Power distribution systems of operating room
• Cloud computing
• Automotive permanent magnet synchronous motors
• Low voltage/high power - AI, GPU
• Digitally controlled LDO regulators circuit
• Smartphones
• Automotive power systems
• Fire equipment power monitoring system
• FPGA design