NLV74HC174ADG

NLV74HC174ADG Overview

16-SOIC (0.154, 3.90mm Width)is the packaging method. There is an embedded version in the package Tube. T flip flop is configured with an output of Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at 2V~6Vvolts. In the operating environment, the temperature is -55°C~125°C TA. D-Typeis the type of this D latch. This type of FPGA is a part of the Automotive, AEC-Q100 series. There should be no greater frequency than 35MHzon its output. D latch consists of 1 elements. Terminations are 16. It is powered from a supply voltage of 5V. This JK flip flop has a 10pFfarad input capacitance. In this case, the D flip flop belongs to the HC/UHfamily. It is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. There is a base part number FF/Latchesfor the RS flip flops. As soon as Vsup reaches 6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 2V for normal operation. Considering its reliability, this T flip flop is well suited for RAIL. There is a consumption of 4μAof quiescent current from it.

NLV74HC174ADG Features

Tube package
Automotive, AEC-Q100 series
16 pins

NLV74HC174ADG Applications

There are a lot of ON Semiconductor NLV74HC174ADG Flip Flops applications.

• CMOS Process
• Single Up Count-Control Line
• Data transfer
• Counters
• Shift Registers
• 2 – Bit synchronous counter
• Clock pulse
• Supports Live Insertion
• Load Control
• Circuit Design