NLV74HC174ADR2G

NLV74HC174ADR2G Overview

As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). It is included in the package Tape & Reel (TR). Currently, the output is configured to use Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. Powered by a 2V~6Vvolt supply, it operates as follows. Temperature is set to -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the Automotive, AEC-Q100 series. You should not exceed 35MHzin its output frequency. In total, it contains 1 elements. It has been determined that there have been 16 terminations. The power source is powered by 5V. JK flip flop input capacitance is 10pF farads. It belongs to the family of electronic devices known as HC/UH. A part of the electronic system is mounted in the way of Surface Mount. A total of 16pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. As soon as Vsup reaches 6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 2V for normal operation. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. There is 4μA quiescent current consumption by it.

NLV74HC174ADR2G Features

Tape & Reel (TR) package
Automotive, AEC-Q100 series
16 pins

NLV74HC174ADR2G Applications

There are a lot of ON Semiconductor NLV74HC174ADR2G Flip Flops applications.

• Cold spare funcion
• Test & Measurement
• Divide a clock signal by 2 or 4
• Memory
• Buffered Clock
• Convert a momentary switch to a toggle switch
• Clock pulse
• Reduced system switching noise
• Data Synchronizers
• Shift Registers