NLV74HCT574ADWRG

NLV74HCT574ADWRG Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. Currently, the operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74HCT series. You should not exceed 30MHzin the output frequency of the device. A total of 1 elements are present. Despite external influences, it consumes 4μAof quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered by a voltage of 5V . This T flip flop has a capacitance of 10pF farads at the input. In this case, the D flip flop belongs to the HCTfamily. This board has 20 pins. It reaches the maximum supply voltage (Vsup) at 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. The flip flop has 2embedded ports.

NLV74HCT574ADWRG Features

Tape & Reel (TR) package
74HCT series
20 pins

NLV74HCT574ADWRG Applications

There are a lot of ON Semiconductor NLV74HCT574ADWRG Flip Flops applications.

• Buffer registers
• ESD protection
• Bus hold
• Modulo – n – counter
• Safety Clamp
• Divide a clock signal by 2 or 4
• Computers
• Asynchronous counter
• ESCC
• Buffered Clock