English

All Products

View All >>
  • OPA137PA

OPA137PA

1 Channels 60mA per Channel 5pA 70 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA137 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-OPA137PA
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 211
  • Description: 1 Channels 60mA per Channel 5pA 70 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA137 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Series MicroAmplifier™
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Terminal Position DUAL
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 2.54mm
Base Part Number OPA137
Pin Count 8
Operating Supply Voltage 18V
Number of Channels 1
Operating Supply Current 220μA
Nominal Supply Current 270μA
Output Current 60mA
Slew Rate 3.5V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 5pA
Voltage - Supply, Single/Dual (±) 4.5V~36V ±2.25V~18V
Output Current per Channel 60mA
Input Offset Voltage (Vos) 10mV
Bandwidth 1MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 1000 kHz
Voltage Gain 94dB
Power Supply Rejection Ratio (PSRR) 80.92dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 2.5mV
Low-Bias YES
Micropower YES
Programmable Power NO
Dual Supply Voltage 15V
Nominal Gain Bandwidth Product 1MHz
Max I/O Voltage 10mV
Height 4.57mm
Length 9.81mm
Width 6.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

OPA137PA Overview


The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 10mV. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 220μA and 10 . Voltage gain should remain at 94dB. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The MicroAmplifier? represents the op amp's series number.

OPA137PA Features


8 Pins
supply voltage of 15V
94dB voltage gain

OPA137PA Applications


There are a lot of Texas Instruments OPA137PA Instrumentational OP Amps applications.

  • Precision measurement
  • Band-pass filter
  • Weighing systems
  • MP3
  • Communication device
  • Power generator
  • Test equipment
  • Polarized electrodes
  • Signal transformation
  • High/low-pass filter circuit