PCA9517DG4

PCA9517DG4 Overview

Packaged in 8-SOIC (0.154, 3.90mm Width) for power buffer easy transportation.Currently available in Tube packages for power buffer.Easily adaptable Surface Mount universal mouthpiece.When we talk about types, here is a typical Buffer, ReDriver.For the purpose of working, this op amp buffer requires 0.9V~5.5V 2.7V~5.5V voltage.The output quality is maintained by collaborating between 2 channels.2-Wire Bus input can be accommodated.In order to avoid mal-functioning of the system, it is recommended that the operating temperature is set to -40°C~85°C.In addition to applications for I2C, this operational amplifier buffer is also intended for other applications.To find pin-to-pin solutions for your specific needs, try searching with "CA9517."There is a 8 terminal on the op amp buffer, which can be seen in the picture below.There is a peak reflow temperature of 260 for this power buffer.This splitter can be used for the completion of many demanding tasks as it is supplied by 3V voltage.There is a pinout for the Power buffer starting from the 8 pins that it has.There is a 2-Wire Bus output from it.It is equipped with 8 pins.Other Line Driver or Receivers like the power buffer play a important role in the industry.This power buffer operates from a voltage of 5mA.3/5V power supplies are enough to run the repeters.The splitter should operate at 1.5mA nominal supply current under normal circumstances.Aside from IT CAN ALSO OPERATE 0.9 TO 5.5, the repeter is also specialized in certain areas.

PCA9517DG4 Features

2 channels.
Mainly used in I2C.
A standard Line Driver or Receivers.
IT CAN ALSO OPERATE 0.9 TO 5.5.

PCA9517DG4 Applications

There are a lot of Texas Instruments PCA9517DG4 Signal Buffers, Repeaters, Splitters applications.

• Cellular Phone Base Stations
• Network Switches/Routers
• Backplane Interconnect
• Add/Drop Muxes
• Clock Distribution
• Loopback
• Digital Cross-Connects
• Industrial/Embedded PC
• Multidrop Buses
• Industrial PCs