PL123-05HSC-R

PL123-05HSC-R Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. The 8-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 8 terminations in this file. For this clock generator ic, a voltage of 3.3V is required. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. A total of 1 circuits are implemented to access the full performance of the electrical part. The frequency generator has a maximum frequency of 134MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. 3.6V would be the maximum supply voltage for this clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. This clock PLL works with a supply voltage of 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. You can find related electrical components to the base part number PL123. At maximum 0.25 ns, this analog clock generator has low timing skew. The digital clock generator has 5 high-enable output pins.

PL123-05HSC-R Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
5 true outputs

PL123-05HSC-R Applications

There are a lot of Microchip Technology PL123-05HSC-R Clock Generators applications.

• Electronic countermeasures
• Fiber Channel
• Clock synchronization
• Pagers
• FPGA and processor clocks
• Antenna automatic tracking
• Walkie-talkies
• Televisions
• Melting
• MRI