PL602-23SC

PL602-23SC Overview

Tube-method packaging is used for clock ICs. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. In it, there are 8 terminations to be found. Basically, this time clock generator needs a voltage of 2.5V. This Clock PLL will be fed by Crystal as its input. For full access to the electronic component's capabilities, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. The Surface Mount allows the electrical component to be installed conveniently on the panel. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Clock generators should operate with the voltage supply of 2.25V~3.63V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. LVCMOS is designed for clock generator's output. According to the base part number PL602, its related parts can be found. There is an available 8 pin on the clock generators.

PL602-23SC Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

PL602-23SC Applications

There are a lot of Microchip Technology PL602-23SC Clock Generators applications.

• High-frequency induction heating
• FPGA and processor clocks
• Media broadcast servers
• Satellite navigation communication
• Pagers
• Frequency shifting decodes
• Modems
• Carrier synchronization in wired communication
• Symbol synchronization
• Test and instrumentation equipment