PLF1E220MCL7

The capacitance can run at the range of 22μF.

±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF1E220MCL7 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF1E220MCL7 is suitable to conduct the ripple current at 1.8A. PLF1E220MCL7 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 25V. There are 2 terminals embeded in PLF1E220MCL7 Capacitor. There are 275μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as Aluminium. There are 2 pins available in the part. The ripple current (AC) can be conducted at 1.8A.

PLF Series

Capacitance: 22μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PLF1E220MCL7 Aluminum Polymer Capacitors.

Typically, PLF1E220MCL7 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

• Motor Start
• Decoupling Noise Filtering
• Frequency Converters
• To enhance power efficiency
• DC/DC, DC/AC, and AC/AC converters
• Smoothing Noise Filtering
• Coupling or blocking
• DC Buffering
• Audio Crossover
• Computer motherboards