QS3390QG

QS3390QG Overview

Providing this information in the QSOP enables digital switch board space to be saved.Among its basic configurations are 28 terminations.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 28 can be found on this turn signal switch.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.A configuration of 28 pins is used.It is mounted in the way of Surface Mount.The logic switch object belongs to the family of 3390.The power supply of 5V is provided for mux switch's normal operation.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The multiplexers have16 input lines on the board that accept voltage levels.A signal source consists of 8 output lines.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.The signal switches is specified to operate at the maximum supply voltage of 5.25V in compliance with the applicable device specification.A minimum supply voltage of 4.75V is required to operate the digital swith.

QS3390QG Features

Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
16 input lines
8 output lines

QS3390QG Applications

There are a lot of Integrated Device Technology (IDT) QS3390QG Signal Switches / Multiplexers / Decoders applications.

• Recording transmission
• To select different devices in microprocessor output
• Computer memory
• Automation system
• High-performance memory-decoding applications
• Data bus control
• D/A converters
• Home automation system
• A/D converters
• Code converters