QS3VH125QG8

QS3VH125QG8 Overview

The reason it is provided is that the board space can be saved by placing digital switch in the QSOP.It is designed with 16 terminations as part of its basic configuration.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemIn this turn signal switch, there are 16 components that can be connected to each pin.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.This multiplexer ic has 16 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of CB3Q/3VH/3C/2B.There are 4 bits in signal multiplexer.There is a power supply provided for the mux switch's normal operation of 3.3V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without any external influences, it consumes 3mA current of multiplexer ic at all times.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 9Ohm.There is no problem with operating this signal switch at the maximum temperature of 85°C.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.Device specifications specify 3.6V as the maximum supply voltage for the signal switches.Typical device specifications specify a voltage supply of 2.3V for the digital swith.In terms of logic ICs, it uses BUS DRIVER.

QS3VH125QG8 Features

Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC

QS3VH125QG8 Applications

There are a lot of Integrated Device Technology (IDT) QS3VH125QG8 Signal Switches / Multiplexers / Decoders applications.

• Small scale TV wall
• Steel plants
• Memory chips
• D/A converters
• CPU memory location identification
• High-performance memory-decoding applications
• High-performance memory systems
• Logic gates for other digital devices
• Robotic vehicles
• Frequency multiplexing system