QS3VH251PAG

QS3VH251PAG Overview

In order to conserve board space, digital switch is included in the TSSOP.There is a design for terminating 16 as part of its basic configuration.The multiplexer's system works with 2.5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.The supply type of this multiplexer ic is Single.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CB3Q/3VH/3C/2B family.As a result, signal multiplexer provides 8 bits.It consumes 4mA current of multiplexer ic since it is not affected by external factors.As far as the resistance is concerned, it operates with 2.The multiplexers have8 input lines on the board that accept voltage levels.At 85°C, the maximum operating temperature of this signal switch is acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.The signal switches is specified to operate at the maximum supply voltage of 3.6V in compliance with the applicable device specification.A minimum supply voltage of 2.3V is specified for the digital swith by its applicable specification.The configuration of the mux switch contains 1 elements.As its logic IC, it uses BUS EXCHANGER.

QS3VH251PAG Features

Supplied in the TSSOP package
Adopting a supply type of Single
8 input lines
BUS EXCHANGER as the logic IC

QS3VH251PAG Applications

There are a lot of Integrated Device Technology (IDT) QS3VH251PAG Signal Switches / Multiplexers / Decoders applications.

• Medium scale TV wall
• Telephone network
• RF-based home automation system
• Enabling different rows of memory depending on address in memory chips
• Data communication
• VGA
• Microprocessor input/output systems
• Robotic vehicles
• To select different task for memory in microprocessor memory systems
• Data distribution