QS3VH257QG

QS3VH257QG Overview

As a means of saving space, digital switch is provided in the QSOP.This configuration includes 16 terminations as part of its basic functionality.The multiplexer's system is powered by 2.5V voltage.A component pin count of 16 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is employed as its supply type.The board is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.In this signal multiplexer, there are 8 bits that are provided.Normally, 3.3V is powered by a battery.The turn signal switch has 4 outputs designed for operation.The part belongs to the Other Logic ICs category of signal switches.Despite not interacting with external factors, it consumes 3mA current of multiplexer ic.The resistance of the signal switching is 2.It is possible to accept voltage levels by using one of the 2 input lines of multiplexers.A signal source has 1 output lines.Signal switchs at temperatures up to 85°C are acceptable.The minimal operating temperature of the multiplexer should be maintained at -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 3.6V.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.As its logic IC, it uses BUS EXCHANGER.

QS3VH257QG Features

Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
1 output lines
BUS EXCHANGER as the logic IC

QS3VH257QG Applications

There are a lot of Integrated Device Technology (IDT) QS3VH257QG Signal Switches / Multiplexers / Decoders applications.

• Automatic health monitoring systems
• Idle motor
• Automatic Monitoring systems
• HDMI applications
• Robotic vehicles
• Make full adder
• Encrypted communications system
• Automation system
• High-performance memory systems
• Telephone network