QS3VH257QG8

QS3VH257QG8 Overview

Due to the lack of space on the board, digital switch is provided in the QSOP.There is a design for terminating 16 as part of its basic configuration.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemCurrently, this turn signal switch has a total of 16 component pins.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.It is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.Signal multiplexer contains 8 bits.The turn signal switch operates with 4 outputs.The part belongs to the Other Logic ICs category of signal switches.No external influence consumes 3mA current of multiplexer ic.Supply voltages of 3.3V can provide reliable performance of the multiplexers.A resistance of 2 is used to operate the signal switching.The multiplexers have 2 input lines used to accept voltage levels.There are 1 output lines on the signal source.At 85°C, the maximum operating temperature of this signal switch is acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 3.6V.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 2.3V.As its logic IC, it uses BUS EXCHANGER.

QS3VH257QG8 Features

Supplied in the QSOP package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
2 input lines
1 output lines
BUS EXCHANGER as the logic IC

QS3VH257QG8 Applications

There are a lot of Integrated Device Technology (IDT) QS3VH257QG8 Signal Switches / Multiplexers / Decoders applications.

• Data distribution
• Transmission from the computer system of a satellite
• LVDS
• Night vision cameras
• Code conversion
• Automation system
• CNC machines
• Make full adder
• Speed synchronization of multiple motors in industries
• Textile mills