SI5310-C-GM

SI5310-C-GM Overview

In order to package it as a clock IC, the Tube package is used. In the 20-VFQFN Exposed Pad package, there is an embedded clock generator. 20 terminations can be found in frequency synthesizer. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. Using 1 circuits, the electronic part's full performance can be accessed. Providing a maximum frequency of 668MHz, this clock-based RF synthesizer is suitable for a variety of applications. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock generators should operate with the voltage supply of 2.375V~2.625V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. CML is designed for clock generator's output. An electrical part such as this one can be classified as a Clock Multiplier component. There is a 20-bit clock-generating IC built specifically for microprocessors in this frequency generator. SI5310 is the base part number for finding related electronic parts. There are a number of 20 pins that are available on the clock generators. This clock generator is a member of DSPLL? series. Clock PLL is configured with 2 output. A supply current of 121mA is required to fully operate clock PLL. It is possible to apply the frequency synthesizers in the SONET;SDH axis.

SI5310-C-GM Features

Available in the 20-VFQFN Exposed Pad
Supply voltage of 2.5V

SI5310-C-GM Applications

There are a lot of Silicon Labs SI5310-C-GM Clock Generators applications.

• Televisions
• Computers to manage memory cards
• FMCW Radar
• Integrated phase noise in aerospace systems
• MRI
• VSAT (Small Ground Satellite Station)
• Bluetooth receivers
• Peripheral devices
• Automatic control system test
• FPGA and processor clocks