SI5368C-C-GQR

SI5368C-C-GQR Overview

As a clock IC, it is packaged by the Tape & Reel (TR) method. In the 100-TQFP package, there is an embedded clock generator. There are 100 terminations found in this file. This time clock generator should be voltaged at 3.3V. Clock is designed for clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 346MHz Max can be achieved with this clock-based frequency synthesizer. This component can be conveniently installed on the panel thanks to the Surface Mount. This clock PLL works with a supply voltage of 1.71V~3.63V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. A frequency synthesizer which is compatible with the CML, LVCMOS, LVDS, LVPECL logic levels is presented here. It is possible to classify this electronic component as a Clock Multiplier, Jitter Attenuator. It is a 100-bit IC that is designed for microprocessors specifically. According to the base part number, its related parts can be founded. The frequency generator is equipped with 100 pins. An electronic part belonging to the DSPLL? series is being used here. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. There is no limit to the number of applications for the frequency generators.

SI5368C-C-GQR Features

Available in the 100-TQFP
Supply voltage of 3.3V

SI5368C-C-GQR Applications

There are a lot of Silicon Labs SI5368C-C-GQR Clock Generators applications.

• Laptops
• Pagers
• Small signal recovery
• Digital circuits
• Signal frequency synthesis circuits
• Coherent carrier tracking
• Wide area power system
• VSAT (Small Ground Satellite Station)
• Microwave radio
• Wireless infrastructure