SM72240MFE-4.63/NOPB

SM72240MFE-4.63/NOPB Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3.6V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. There are 5 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supply current of the power management is 8μA. You can always use SM72240, the base supervisor number, to search for similar PMICs of the manufacturer. Supervisors from the well-known SolarMagic? series product line are featured in this PMIC.

SM72240MFE-4.63/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
8μA operating supply current

SM72240MFE-4.63/NOPB Applications

There are a lot of Texas Instruments SM72240MFE-4.63/NOPB Voltage Supervisors applications.

• Unattended substation automation
• Refrigeration
• Transformer load monitoring equipment
• Insulation fault location system
• Telecommunications equipment
• Satellite navigation
• Leakage current detection
• Sensitive sensors
• Utility meter
• Analog circuit