SN65LVDM22DG4

SN65LVDM22DG4 Overview

There is a packaging of 16-SOIC (0.154, 3.90mm Width) for convenient transport of the power buffer.The package is ready for power buffer in Tube pieces.A universal mout that can be easily adapted to fit any person.In terms of types, this is a typical Buffer, Multiplexer.There is no voltage involved in the operation of this op amp buffer.For the output quality to be maintained, 1 x 2:2 channels work together.In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C.To find more pin-to-pin solutions, search with "65LVDM22".An op amp buffer with 16 terminals can be found on the left side of the op amp buffer.Reflow temperature at its peak is calculated to be 260.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.It starts with the 16 pins of the Power buffer in order to determine the pinout of the Power buffer.Output is expressed in LVDS.The 16 pins are on it.A Surface Mount hole allows it to be mounted on a PCB or other board.In order for this power buffer to operate, a voltage of 27mA must be applied.During normal operation, 3.3V operating voltage is required.Normal use of the splitter requires 27mA as the nominal supply current.The repeater signal implements 2 receivers.

SN65LVDM22DG4 Features

1 x 2:2 channels.

SN65LVDM22DG4 Applications

There are a lot of Texas Instruments SN65LVDM22DG4 Signal Buffers, Repeaters, Splitters applications.

• Protection Switching
• Desktop Computers
• Medical
• Add/Drop Muxes
• Digital Cross-Connects
• Network Switches/Routers
• Backplane Interconnect
• PECL-to-LVDS Translation
• Storage Area Networks
• SATA SSDs or HDDs