SN65LVDM22PW

SN65LVDM22PW Overview

In order to make transportation as convenient as possible, power buffer is packaged in 16-TSSOP (0.173, 4.40mm Width).In a package of Tube it is ready for power buffer.Surface Mount Universal mout for easy adaptation.As a matter of fact, this type is typical of the Buffer, Multiplexer type.3V~3.6V voltage is used to power this op amp buffer.It is important for 1 x 2:2 channels to work together to ensure quality output.To avoid malfunctioning, the operating temperature should be set to -40°C~85°C.In order to find more pin-to-pin solutions that suit your specific needs, try searching with "65LVDM22".An op amp buffer with 16 terminals can be found.During reflow, the peak temperature of the material is determined by the number 260.This splitter consists of 3.3V voltage and is able to accomplish a variety of tasks that are splittericularly demanding.Its pinout starts with 16 pins.In terms of output, it outputs in LVDS units.The 16 pins are on it.The Surface Mount on the board allows it to be mounted on PCBs or other boards.It operates at a voltage of 27mA.Operating voltage 3.3V is required for normal operation.Splitters should be powered by 27mA-volts under normal conditions.In this repeater signal, 2 receivers are implemented.

SN65LVDM22PW Features

1 x 2:2 channels.

SN65LVDM22PW Applications

There are a lot of Texas Instruments SN65LVDM22PW Signal Buffers, Repeaters, Splitters applications.

• Multidrop Buses
• Protection Switching
• Data or Clock Signal Amplification
• Clock Distribution
• Laptop Computers (for External Video Cards)
• Network Switches/Routers
• Backplane Interconnect
• Clock Distribution
• Communications Switchers
• Medical