SN65LVDS101DGK

SN65LVDS101DGK Overview

Designed for convenient transportation, power buffer comes packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Tube packages are ready for power buffer.The Surface Mount universal mout has the advantage of being easily adaptable.As far as types go, this is a typical Buffer, ReDriver.The op amp buffer uses a voltage of 3V~3.6V volts for its operation.As a result of this, there is no input facilitation.For the operational amplifier buffer to function properly, the operating temperature should be set to -40°C~85°C.Search with "65LVDS101" to get more pin-to-pin solutions.You can find 8 terminals of the op amp buffer.Reflow temperature at its peak is calculated to be 260.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.There is a pinout for the Power buffer starting from the 8 pins that it has.LVPECL is the output unit.The 8 pins are on it.A Surface Mount hole is available for mounting it on a PCB or another board.In the industry, other Line Driver or Receivers like the power buffer play an important role.In order for this power buffer to operate, a voltage of 30mA must be applied.During normal operation, 3.3V operating voltage is required.The repeter utilizes a 1-Bit receiver.There is a maximum power dissipation of 377mW for this splitter.A 1 element interface repeater signal such as this is used.The spliter's current output is 12μA.

SN65LVDS101DGK Features

A standard Line Driver or Receivers.
1-Bit receiver.

SN65LVDS101DGK Applications

There are a lot of Texas Instruments SN65LVDS101DGK Signal Buffers, Repeaters, Splitters applications.

• Desktop Computers
• Network Switches/Routers
• Backplane Interconnect
• PECL-to-LVDS Translation
• Loopback
• Industrial PCs
• SATA SSDs or HDDs
• Medical
• DSLAMs
• Add/Drop Muxes